SINGLE SHAFT SHREDDER

These machines are ideally suited for

1. Crushing of large lumps without precutting

2. Crushing of hdpe pipes of diameter 450mm thickness say. 60mm & length 2.5 meters without precutting.

3. Bails of thin films, pet bottles etc can be fed directly into the single shaft shredder to granulate into small chips.

4. Wood scraps can also be granulated to small chips

• The cutting chamber has rotor with multicutters bolted onto the rotor. The blades on the rotors are square shape having 4 indexable edges.

• The rotor drive system consists of foot mounted motor which drives SMSR (Shaft Mounted Speed Reducer) through pulleys. The SMSR is mounted on rotor shaft .The rotor shaft rotates at about 70 rpm.The SMSRr takes care of impact loading of the rotor cutter by means of rubber bushing suspension system.

• The rpm of rotor is approximately 70, obtained by SMSR (Shaft Mounted Speed Reducer) & V belt drive through motor.

• The fix blade is fitted into the cutting chamber. The fix blade has multiple V grooves (Angle 90º)

• Thick pipes, lumps or bail of thin films are fed manually or through conveyor into the cutting chamber via sound proof hoper.

• The reciprocating ram (with adjustable feed) presses the articles against rotor blades & fix blades, there by granulating the pipes, lumps or articles into small chips.